View MXM8-PW50-0000_7585822.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

features and benefts ? high effcacy for sustainable design ? compact 3535 package ? minimum 70 and 80 cri for both indoor and outdoor applications ? ansi compliant 1/6th color binning ? supports energy star ? lumen maintenance certifcation requirements key applications ? lamps ? indoor area lighting ? downlight ? outdoor ? architecture ? high bay & low bay luxeon 3535 datasheet ds202 ?2013 philips lumileds lighting company. luxeon 3535 mid-power leds illumination portfolio introduction luxeon ? 3535 delivers optimized performance in combination with quality of light needed for distributed light source applications. in addition to delivering specifed correlated color temperature and color rendering combinations, these emitters deliver the effcacy and reliability required by the indoor illumination markets. this document contains the performance data needed to design and engineer applications based on these luxeon 3535 emitters.
luxeon 3535 datasheet ds202 20130228 ?2013 philips lumileds lighting company. i table of contents general information 2 product nomenclature 2 average lumen maintenance characteristics 2 environmental compliance 2 product selection 3 optical characteristics 4 electrical characteristics 5 absolute maximum ratings 5 jedec moisture sensitivity 5 refow soldering characteristics 6 mechanical dimensions 7 solder pad design 8 relative spectral distribution 9 light output characteristics 10 luminous effcacy characteristics 11 forward current characteristics 12 typical radiation patterns 13 emitter pocket tape packaging 15 emitter reel packaging 16 product binning and labeling 17 forward voltage bins 18 color bin structure 19
luxeon 3535 datasheet ds202 20130228 ?2013 philips lumileds lighting company. 2 general information product nomenclature luxeon mid-power illumination emitters are tested and binned at 100 ma, with current pulse duration of 20 ms. all characteristic charts where the thermal pad is kept at constant temperature (25oc typically) are measured with current pulse duration of 20 ms. the part number designations for the mxm8 series is explained as follows: m x m a - b c d e - i j k l where: a designates minimum cri performance (value 7 = 70 minimum and 8 = 80 minimum) b designates radiation pattern (value p = lambertian) c designates color (value w = white) d, e designates nominal ansi cct (for example, 30 = 3000k and 40 = 4000k) i, j, k & l designates additional part numbers therefore products in this series with minimum cri value of 80, cct of 4000k will have the part numbering scheme: m x m 8 - p w 4 0 average lumen maintenance characteristics lumen maintenance for solid-state lighting devices (leds) is typically defned in terms of the percentage of initial light output remaining after a specifed period of time. environmental compliance philips lumileds is committed to providing environmentally friendly products to the solid-state lighting market. luxeon mid-power leds are compliant to the european union directives on the restriction of hazardous substances in electronic equipment, namely reach and the rohs directive. philips lumileds will not intentionally add the following restricted materials to these leds: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (pbb) or polybrominated diphenyl ethers (pbde).
luxeon 3535 datasheet ds202 20130228 ?2013 philips lumileds lighting company. 3 product selection product selection for mid-power leds solder pad temperature = 25c, test current = 100 ma table 1. nominal cct part number minimum cri typical cri typical r9 minimum luminous flux (lm) ? v typical luminous flux (lm) ? v 2700k mxm8-pw27-0000 80 82 10 28 32 3000k mxm8-pw30-0000 80 82 10 30 33 3500k mxm8-pw35-0000 80 82 10 30 34 4000k mxm8-pw40-0000 80 82 10 32 36 5000k MXM8-PW50-0000 80 82 10 32 36 5700k mxm8-pw57-0000 80 82 10 32 36 6500k mxm8-pw65-0000 80 82 10 32 36 product selection for mid-power leds solder pad temperature = 25c, test current = 100 ma table 2. nominal cct part number color rendering index minimum luminous flux (lm) ? v typical luminous flux (lm) ? v minimum typical 4000k mxm7-pw40-0000 70 72 32 39 5000k mxm7-pw50-0000 70 73 32 39 5700k mxm7-pw57-0000 70 73 32 39 6500k mxm7-pw65-0000 70 74 32 39 note for tables 1 & 2: 1. philips lumileds maintains a tolerance of 7.5% on luminous fux and 2 on cri measurements.
luxeon 3535 datasheet ds202 20130228 ?2013 philips lumileds lighting company. 4 optical characteristics optical characteristics of mid-power leds solder pad temperature = 25c, test current = 100 ma table 3. nominal cct color temperature cct typical total included angle [1] (degrees) u 0 90v typical viewing angle [2] (degrees) 2 u ? minimum typical maximum 2700k 2550k 2700k 2850k 150 115 3000k 2850k 3000k 3200k 150 115 3500k 3200k 3500k 3750k 150 115 4000k 3750k 4000k 4250k 150 115 5000k 4700k 5000k 5300k 150 115 5700k 5300k 5700k 6000k 150 115 6500k 6000k 6500k 7000k 150 115 notes for table 3: 1. total angle at which 90% of total luminous fux is captured. 2. viewing angle is the off axis angle from lamp centerline where the luminous intensity is ? of the peak value.
luxeon 3535 datasheet ds202 20130228 ?2013 philips lumileds lighting company. 5 electrical characteristics electrical characteristics of mid-power leds thermal pad temperature = 25oc, test current = 100 ma table 4. part number forward voltage v f [1] (v) typical temperature coeffcient of forward voltage [2] (mv/c) d v f / d t j typical thermal resistance junction to solder pad (c/w) r u j-c minimum typical maximum mxm8-pw27-0000 mxm8-pw30-0000 mxm8-pw35-0000 mxm8-pw40-0000 MXM8-PW50-0000 mxm8-pw57-0000 mxm8-pw65-0000 2.80 3.10 3.40 -2.0 to -4.0 20 notes for table 4: 1. philips lumileds maintains a tolerance of 0.10v on forward voltage measurements. 2. measured at t between 25c and 110c. absolute maximum ratings table 5. parameter maximum performance dc forward current (ma) [1] 150 peak pulsed forward current (ma) [2] 180 esd sensitivity class 3a human body model class c machine model led junction temperature [3] 115c operating case temperature at 100 ma -40c - 105c storage temperature -40c - 100c soldering temperature jedec 020d 260c allowable refow cycles 3 reverse voltage (vr) [4], [5] -5v notes for table 5: 1. ripple current with a frequency of 50-150 hz is allowed, as long as the average of the current waveform is below 150 ma, and the maximum of the current waveform is lower than 180 ma. 2. at 10% duty cycle and pulse width 10ms. 3. proper current derating must be observed to maintain junction temperature below the maximum. 4. luxeon mid-power leds are not designed to be driven in reverse bias. 5. at maximum reverse current of 10 a. jedec moisture sensitivity table 6. level floor life soak requirements standard time conditions time conditions 2 1 year [ 30c / 60% rh 168 hrs. + 5 / - 0 hrs. [ 85c / 60% rh
luxeon 3535 datasheet ds202 20130228 ?2013 philips lumileds lighting company. 6 refow soldering characteristics table 7. refow profle in accordance with j-std-020d. profle feature lead free assembly preheat/soak : temperature min (t smin ) temperature max (t smax ) maximum time (t s ) from t smin to t smax 150c 200c 120 seconds ramp-up rate (t to t p ) 3c / second liquidous temperature (t ) 217c maximum time (t ) maintained above t 150 seconds maximum peak package body temperature (t p ) 260c time (t p ) within 5c of the specifed temperature (t c ) 10-30 seconds maximum ramp-down rate (t p to t ) 6c / second maximum time 25c to peak temperature 8 minutes note for table 7: 1. all temperatures refer to the application printed circuit board (pcb), measured on the surface adjacent to the package body. 0 50 100 150 200 250 300 05 0 100 150 200 250 300 te mp er at ur e ( c) ti me (s econds ) t l : 217 c 255 c +5 /- 0 c 260 c +0 /- 5 c t s : 60-120s ec . t l : 60-150 se c, ma x t p : 10-30s ec . 30s ec ma x. t smi n : 150 c ra mp -u p ra te , 3 c/ se c. ma x. t sma x :2 00 c t p : 260 c figure 1. temperature profle for table 7.
luxeon 3535 datasheet ds202 20130228 ?2013 philips lumileds lighting company. 7 mechanical dimensions notes for figure 2: 1. all dimensions are in millimeters. 2. tolerance: 0.10mm. 3. materials ? lead frame: copper alloy with silver plating ? package body: high temperature thermal plastic ? encapsulant: silicone resin ? solder lead finish: sn-sn plating 3. 5 3. 5 2. 6 0. 8 1. 5 0. 8 0. 05 0. 5 0. 7 3. 8 max r 1 . 30 anode mark figure 2. package outline drawing.
luxeon 3535 datasheet ds202 20130228 ?2013 philips lumileds lighting company. 8 solder pad design notes for figure 3: 1. the drawing above shows the recommended solder pad layout on printed circuit board (pcb). 2. application brief ab202 provides extensive details for this layout. in addition, the .dwg fles are available at www.philipslumileds.com and www.philipslumileds.cn.com. recommended solder pad dimensions recommended pad layout dimensions additional conductor area covered by solder mask for improving heat dissipation figure 3. solder pad layout.
luxeon 3535 datasheet ds202 20130228 ?2013 philips lumileds lighting company. 9 relative spectral distribution relative intensity vs wavelength, mxm7-pwxx relative intensity vs wavelength, mxm8-pwxx 2.5 4000k 2.0 5000k 1.5 n tensity 5700k 6500k 4000k 1.0 relative i n 6500k 4000k 0.5 5700k 5000k 0.0 400 450 500 550 600 650 700 750 800 6500k wavelength (nm) figure 4. typical color spectrum of mxm7-pwxx emitter, integrated measurement at solder pad temperature = 25c, forward current = 100 ma. 2.5 2700k 3000k 2.0 3000k 3500k 4000k 2700k 1.5 tensity 5000k 5700k 3000k 3500k 1.0 r elative in 6500k 4000k 0.5 r 5700k 5000k 6500k 0.0 400 450 500 550 600 650 700 750 800 wavelength (nm) figure 5. typical color spectrum of mxm8-pwxx emitter, integrated measurement at solder pad temperature = 25c, forward current = 100 ma.
luxeon 3535 datasheet ds202 20130228 ?2013 philips lumileds lighting company. 10 light output characteristics relative flux over temperature mxm8-pwxx/mxm7-pwxx relative flux vs forward current mxm8-pwxx/mxm7-pwxx 120% 100% 60% 80% flux 40% 60% relative 20% 40% 0% 10 25 40 55 70 85 100 115 10 25 40 55 70 85 100 115 thermal pad temperature ( ? c) figure 6. typical relative light output vs. thermal pad temperature, forward current = 100 ma. 1.60 1.20 f lux 0.80 relative f 0.40 0.00 0 25 50 75 100 125 150 forward current (ma) figure 7. typical relative luminous fux vs. forward current, solder pad temperature = 25oc.
luxeon 3535 datasheet ds202 20130228 ?2013 philips lumileds lighting company. 11 luminous effcacy characteristics relative luminous effcacy vs forward current mxm8-pwxx/mxm7-pwxx 1.4 1.6 1.2 c y 1.0 us effica c 2700k 3000k 0.6 0.8 v e lumino 3500k 4000k 0.4 relati v 5000k 5700k 6500k 00 0.2 6500k 0 . 0 0 15 30 45 60 75 90 105 120 135 150 forward current (ma) figure 8. typical emitter effcacy versus forward current, solder pad temperature = 25c.
luxeon 3535 datasheet ds202 20130228 ?2013 philips lumileds lighting company. 12 forward current characteristics forward current vs forward voltage mxm8-pwxx/mxm7-pwxx 150 125 ) 100 r rent (ma ) 50 75 r ward cu r 25 50 fo r 0 25 2.00 2.25 2.50 2.75 3. 00 3.25 3.50 3.75 4.00 forward voltage (v) figure 9. typical forward current vs. forward voltage, solder pad temperature = 25c.
luxeon 3535 datasheet ds202 20130228 ?2013 philips lumileds lighting company. 13 typical radiation patterns radiation pattern in cartesian coordinate system radiation pattern in polar coordinate system 1.25 1.00 0.75 n tensity 0.50 relative i n 0.25 0.00 -90 -75 -60 -45 -30 -15 0 15 30 45 60 75 90 angle (degree) figure 10. typical representative spatial radiation pattern. 0 30 60 90 120 150 180 -150 -120 -90 -60 -30 20% 40% 60% 80% 0 30 60 90 120 150 180 -150 -120 -90 -60 -30 20% 40% 60% 80% 0 30 60 90 120 150 180 -150 -120 -90 -60 -30 20% 40% 60% 80% 0 30 60 90 120 150 180 -150 -120 -90 -60 -30 20% 40% 60% 80% figure 11. typical polar plot of radiation pattern.
luxeon 3535 datasheet ds202 20130228 ?2013 philips lumileds lighting company. 14 color shift vs viewing angle 0.06 0.07 dx d y 0.05 y 0.04 dy 0.02 0.03 dx, 0.01 -0.01 0.00 -90 -75 -60 -45 -30 -15 0 15 30 45 60 75 90 angle (degree) figure 12. typical plot of color shift vs. viewing angle.
luxeon 3535 datasheet ds202 20130228 ?2013 philips lumileds lighting company. 15 emitter pocket tape packaging notes for figure 13: 1. all dimensions are in millimeters 2. empty component pockets sealed with top cover tape 3. the maximum number of consecutive missing leds is two. 8.0 0.1 5.5 0.1 ?1 .5 0 4.0 0.1 2. 0 0.05 ?1.50 0.25/-0.0 12 +0.3/-0. 1 0.29 0.02 2.2 0.1 3.75 0.1 anode mark anode side 1.75 0 .1 3.85 0 .1 figure 13. emitter pocket tape packaging.
luxeon 3535 datasheet ds202 20130228 ?2013 philips lumileds lighting company. 16 emitter reel packaging notes for figure 14: 1. all dimentions are in millimeters. 2. empty component pockets sealed with top cover tape. 3. 7 inch reel-1000 pieces per reel. 4. minimum packing quantity is 500 pieces. 5. the maximum number of consecutive missing leds is two. 6. in accordance with eia-481-1-b specifcation. 62.5 +0/-2. 5 12.4 +2/-0 18.4 max 180.0 0.5 part no: mxm8-pw40-5601 cat code: l56x date code: 1205 quantity: 199 8 lot no: 090430-0136959718 ?24.0 0.5 ?13.0 0.2 2.0 +0.5/-0.0 figure 14. emitter reel packaging.
luxeon 3535 datasheet ds202 20130228 ?2013 philips lumileds lighting company. 17 product binning and labeling purpose of product binning in the manufacturing of semiconductor products, there is a variation of performance around the average values given in the technical data sheets. for this reason, philips lumileds bins the led components for luminous fux, color and forward voltage (v f ). decoding product bin labeling luxeon mid-power emitters are labeled using a four digit alphanumeric code (cat code) depicting the bin values for emitters packaged on a single reel. all emitters packaged within a reel are of the same 3-variable bin combination. using these codes, it is possible to determine optimum mixing and matching of products for consistency in a given application. reels of 2700k, 3000k, 3500k, 4000k, 5000k, 5700k, 6500k emitters are labeled with a four digit alphanumeric cat code following the format below. abcd a = flux bin (l etc.) b and c = color bin (for example 51, 52, 53, 54, 55, 56) d = v f bin luminous flux bins table 8 lists the standard photometric luminous fux bins for luxeon mid-power emitters (tested and binned at 100 ma). although several bins are outlined, product availability in a particular bin varies by production run and by product performance. not all bins are available in all colors. table 8. flux bins - all colors bin code minimum photometric flux (lm) maximum photometric flux (lm) k 28 32 l 32 36 m 36 40 p 40 44 tested and binned at 25c, if=100 ma tester tolerance: 7%
luxeon 3535 datasheet ds202 20130228 ?2013 philips lumileds lighting company. 18 forward voltage bins table 9. v f bins bin code minimum forward voltage (v) maximum forward voltage (v) t 2.8 2.9 v 2.9 3.0 w 3.0 3.1 x 3.1 3.2 y 3.2 3.3 z 3.3 3.4 tested and binned at 25c, if = 100 ma
luxeon 3535 datasheet ds202 20130228 ?2013 philips lumileds lighting company. 19 color bin structure mxm8-pw27-0000 color bin structure luxeon mid-power emitters are tested and binned by x,y coordinates. table 10. luxeon mid-power ansi 1/6 color bin coordinates for mxm8-pw27-0000 emitter bin code x y bin code x y 81 0.4625 0.4729 0.4813 0.4703 0.4113 0.4299 0.4319 0.4130 84 0.4446 0.4546 0.4625 0.4520 0.3910 0.4095 0.4113 0.3927 82 0.4520 0.4625 0.4703 0.4593 0.3927 0.4113 0.4132 0.3944 85 0.4468 0.4562 0.4646 0.4546 0.4077 0.4260 0.4280 0.4095 83 0.4546 0.4646 0.4729 0.4625 0.4095 0.4280 0.4299 0.4113 86 0.4373 0.4468 0.4546 0.4446 0.3893 0.4077 0.4095 0.3910 notes for table 10: 1. tester tolerance: 0.01 in x and y coordinates. 0.440 0.450 0.430 0.420 85 81 83 2700k 0.400 0.410 y 82 84 86 2700k 0.390 86 2580 2870k 0.380 2870k 0.370 0.430 0.435 0.440 0.445 0.450 0.455 0.460 0.465 0.470 0.475 0.480 0.485 0.490 x figure 15. ansi 2700k 1/6th color bin structure, forward current = 100 ma, thermal pad temperature = 25c.
luxeon 3535 datasheet ds202 20130228 ?2013 philips lumileds lighting company. 20 color bin structure, continued mxm8-pw30-0000 color bin structure luxeon mid-power emitters are tested and binned by x,y coordinates. table 11. luxeon mid-power ansi 1/6 color bin coordinates for mxm8-pw30-0000 emitter bin code x y bin code x y 71 0.4386 0.4474 0.4562 0.4468 0.4048 0.4228 0.4260 0.4077 74 0.4222 0.4305 0.4386 0.4298 0.3840 0.4019 0.4048 0.3867 72 0.4298 0.4386 0.4468 0.4373 0.3867 0.4048 0.4077 0.3893 75 0.4223 0.4299 0.4387 0.4305 0.3990 0.4165 0.4197 0.4019 73 0.4305 0.4387 0.4474 0.4386 0.4019 0.4197 0.4228 0.4048 76 0.4147 0.4223 0.4305 0.4222 0.3814 0.3990 0.4019 0.3840 notes for table 11: 1. tester tolerance: 0.01 in x and y coordinates. 0.435 0.445 0.425 0.415 3000k 75 71 73 0.395 0.405 y 3000k 72 74 0.385 0.395 74 76 2870k 0.375 3200k 0.365 0.405 0.410 0.415 0.420 0.425 0.430 0.435 0.440 0.445 0.450 0.455 0.460 0.465 x figure 16. ansi 3000k 1/6th color bin structure, forward current = 100 ma, thermal pad temperature = 25c.
luxeon 3535 datasheet ds202 20130228 ?2013 philips lumileds lighting company. 21 color bin structure, continued mxm8-pw35-0000 color bin structure luxeon mid-power emitters are tested and binned by x,y coordinates. table 12. luxeon mid-power ansi 1/6 color bin coordinates for mxm8-pw35-0000 emitter bin code x y bin code x y 61 0.4130 0.4198 0.4299 0.4223 0.3944 0.4115 0.4165 0.3990 64 0.3975 0.4036 0.4130 0.4061 0.3731 0.3898 0.3944 0.3773 62 0.4061 0.4130 0.4223 0.4147 0.3773 0.3944 0.3990 0.3814 65 0.3943 0.3996 0.4097 0.4036 0.3853 0.4015 0.4065 0.3898 63 0.4036 0.4097 0.4198 0.4130 0.3898 0.4065 0.4115 0.3944 66 0.3889 0.3943 0.4036 0.3975 0.3690 0.3853 0.3898 0.3731 notes for table 12: 1. tester tolerance: 0.01 in x and y coordinates. 0 420 0.430 0.410 0 . 420 0.400 61 63 0.390 y 3500k 65 62 0.380 64 66 3250k 0.370 3750k 0.360 0.380 0.385 0.390 0.395 0.400 0.405 0.410 0.415 0.420 0.425 0.430 0.435 0.440 x figure 17. ansi 3500k 1/6th color bin structure, forward current = 100 ma, thermal pad temperature = 25c.
luxeon 3535 datasheet ds202 20130228 ?2013 philips lumileds lighting company. 22 color bin structure, continued mxm7-pw40-0000 color bin structure luxeon mid-power emitters are tested and binned by x,y coordinates. table 13. luxeon mid-power ansi 1/6 color bin coordinates for mxm7-pw40-0000 emitter bin code x y bin code x y 51 0.3869 0.3916 0.4006 0.3952 0.3829 0.3987 0.4044 0.3880 54 0.3746 0.3786 0.3869 0.3822 0.3624 0.3777 0.3829 0.3670 52 0.3822 0.3869 0.3952 0.3898 0.3670 0.3829 0.3880 0.3716 55 0.3703 0.3736 0.3826 0.3786 0.3726 0.3874 0.3931 0.3777 53 0.3786 0.3826 0.3916 0.3869 0.3777 0.3931 0.3987 0.3829 56 0.3670 0.3703 0.3786 0.3746 0.3578 0.3726 0.3777 0.3624 notes for table 13: 1. tester tolerance: 0.01 in x and y coordinates. 0.410 0.420 0.400 0.390 51 53 55 0.370 0.380 y 4000k 52 54 55 0.360 3750k 56 0.350 4250 k 0.340 0.360 0.365 0.370 0.375 0.380 0.385 0.390 0.395 0.400 0.405 0.410 x figure 18. ansi 4000k 1/6th color bin structure, forward current = 100 ma, thermal pad temperature = 25c.
luxeon 3535 datasheet ds202 20130228 ?2013 philips lumileds lighting company. 23 color bin structure, continued mxm7-pw50-0000 color bin structure luxeon mid-power emitters are tested and binned by x,y coordinates. table 14. luxeon mid-power ansi 1/6 color bin coordinates for mxm7-pw50-0000 emitter bin code x y bin code x y 31 0.3479 0.3493 0.3551 0.3533 0.3580 0.3712 0.3760 0.3624 34 0.3416 0.3425 0.3479 0.3465 0.3408 0.3536 0.3580 0.3448 32 0.3465 0.3479 0.3533 0.3515 0.3448 0.3580 0.3624 0.3487 35 0.3371 0.3376 0.3434 0.3425 0.3493 0.3616 0.3664 0.3536 33 0.3425 0.3434 0.3493 0.3479 0.3536 0.3664 0.3712 0.3580 36 0.3366 0.3371 0.3425 0.3416 0.3369 0.3493 0.3536 0.3408 notes for table 14: 1. tester tolerance: 0.01 in x and y coordinates. 0 380 0.390 0.370 0 . 380 0.360 35 31 33 0.350 y 5000k 35 32 34 4750 k 0.340 5250k 36 0.330 5250k 0.320 0.325 0.330 0.335 0.340 0.345 0.350 0.355 0.360 0.365 x figure 19. ansi 5000k 1/6th color bin structure, forward current = 100 ma, thermal pad temperature = 25c.
luxeon 3535 datasheet ds202 20130228 ?2013 philips lumileds lighting company. 24 color bin structure, continued mxm7-pw57-0000 color bin structure luxeon mid-power emitters are tested and binned by x,y coordinates. table 15. luxeon mid-power ansi 1/6 color bin coordinates for mxm7-pw57-0000 emitter bin code x y bin code x y 21 0.3319 0.3320 0.3376 0.3371 0.3446 0.3565 0.3616 0.3493 24 0.3270 0.3267 0.3319 0.3318 0.3285 0.3399 0.3446 0.3327 22 0.3318 0.3319 0.3371 0.3366 0.3327 0.3446 0.3493 0.3369 25 0.3215 0.3207 0.3263 0.3267 0.3353 0.3462 0.3513 0.3399 23 0.3267 0.3263 0.3320 0.3319 0.3399 0.3513 0.3565 0.3446 26 0.3222 0.3215 0.3267 0.3270 0.3243 0.3353 0.3399 0.3285 notes for table 15: 1. tester tolerance: 0.01 in x and y coordinates. 0.370 0.360 21 0.350 25 21 23 0.340 y 5700k 22 24 26 5250k 0.330 6000k 26 0.320 6000k 0.310 0.310 0.315 0.320 0.325 0.330 0.335 0.340 0.345 0.350 x figure 20. ansi 5700k 1/6th color bin structure, forward current = 100 ma, thermal pad temperature = 25c.
luxeon 3535 datasheet ds202 20130228 ?2013 philips lumileds lighting company. 25 color bin structure, continued mxm7-pw65-0000 color bin structure luxeon mid-power emitters are tested and binned by x,y coordinates. table 16. luxeon mid-power ansi 1/6 color bin coordinates for mxm7-pw65-0000 emitter bin code x y bin code x y 11 0.3158 0.3146 0.3206 0.3213 0.3317 0.3422 0.3481 0.3371 14 0.3119 0.3103 0.3158 0.3170 0.3162 0.3263 0.3317 0.3212 12 0.3170 0.3158 0.3213 0.3221 0.3212 0.3317 0.3371 0.3261 15 0.3048 0.3028 0.3087 0.3103 0.3209 0.3304 0.3363 0.3263 13 0.3103 0.3087 0.3146 0.3158 0.3263 0.3363 0.3422 0.3317 16 0.3068 0.3048 0.3103 0.3119 0.3113 0.3209 0.3263 0.3162 notes for table 16: 1. tester tolerance: 0.01 in x and y coordinates. 0 355 0.365 0.345 0 . 355 0.335 11 13 0.325 y 6500k 15 12 14 6000k 0.315 7000k 16 0.305 7000k 0.295 0.290 0.295 0.300 0.305 0.310 0.315 0.320 0.325 0.330 0.335 x figure 21. ansi 6500k 1/6th color bin structure, forward current = 100 ma, thermal pad temperature = 25c.
company information philips lumileds is a leading provider of leds for everyday lighting applications. the companys records for light output, effcacy and thermal management are direct results of the ongoing commitment to advancing solid-state lighting technology and enabling lighting solutions that are more environmentally friendly, help reduce co2 emissions and reduce the need for power plant expansion. philips lumileds luxeon ? leds are enabling never before possible applications in outdoor lighting, shop lighting, home lighting, digital imaging, display and automotive lighting. philips lumileds is a fully integrated supplier, producing core led material in all three base colors, (red, green, blue) and white. philips lumileds has r&d centers in san jose, california and in the netherlands, and production capabilities in san jose, singapore and penang, malaysia. founded in 1999, philips lumileds is the high fux led technology leader and is dedicated to bridging the gap between solid-state technology and the lighting world. more information about the companys luxeon led products and solid-state lighting technologies can be found at www philipslumileds com. luxeon 3535 datasheet ds202 20130228 ?2013 philips lumileds lighting company. all rights reserved. luxeon is a registered trademark of the philips lumileds lighting company in the united states and other countries. www philipslumileds com www philipslumileds cn com philips lumileds lighting company shall not be liable for any kind of loss of data or any other damages, direct, indirect or consequential, resulting from the use of the provided information and data. although philips lumileds lighting company has attempted to provide the most accurate information and data, the materials and services information and data are provided as is and philips lumileds lighting company neither warranties, nor guarantees the contents and correctness of the provided information and data. philips lumileds lighting company reserves the right to make changes without notice. you as user agree to this disclaimer and user agreement with the download or use of the provided materials, information and data.

▲Up To Search▲

Price & Availability of MXM8-PW50-0000

	To Download MXM8-PW50-0000 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .